Showing posts with label PC Update. Show all posts
Showing posts with label PC Update. Show all posts

18 Jul 2009

belated update


So - not much happening. Until later today.

I'll finally get around to benching that 4850X2. Since then, I picked up the Gainward GS GLH 4870X2 (retails at £420) for £200 on the BenchTec website as well, so I'll be benching that too (and in CF). I expect some global points here, so wish me luck.

In terms of moving computers around, I finally organised the machine I'm selling to a mate - yes, I'm selling HarukaKanata in the CM 335 Elite. As such, my PC situation is being completely moved around (also so I can get my i7 out for benching).

JC now has a 550W PSU and the GTX280 in it. It's now my purely CUDA machine (BOINC and work).

HAL is now up and running - as a 2x 4850 in CF crunching machine AND my network storage:

E6400 @ 2.4Ghz
4GB DDR2
MSI Platinum PowerUp
700W PSU
2x4850 in CF with Akasa Nero Vortexx VGA Coolers
Antec 300

A few points about HAL - with two GFX cards in there always at full pelt, with the extra coolers, the temps are sort of in reasonable levels. The card on top never goes above 60C, however the card at the bottom hits 90C. While better than the 110 I was getting before, I'd like that 90 to be 80. Though I have noticed that if I overclock the cards, they actually use less shader cores on BOINC, and are cooler, but still crunch faster. Weird that. So the top card runs at 800/750 (mem speed doesn't matter for BOINC, so it's underclocked), the bottom at 730/750. Given that 3D speed is meant to be 625/1000, I reckon that's quite good.

In terms of Dutchie, well at the minute it has not got a PSU, and is going in my Verre v770. It'll get a couple of graphics cards (if at some point my 4670s become useful...) and a PSU as and when.

HELLFIRE is going into the Thermaltake Armour. It's big, roomy, and I've been spending money on things like the 4870X2 rather than on a case. I've changed the fan on the CPU cooler to an AC-Ryan 80CFM one rather than the Delta - I think it was going too fast for optimal air contact.

So today, my benching will hopefully consist of:

4850X2
4870X2
4850X2 in CF (i.e. a 4850X2 and something else)
4870X2 in CF (again, a 4870X2 and something else)
4850 in CF if I get around to it...

Maybe sort out my overclock on HELLFIRE, too.

In terms of BOINC update, well the ATI cards are doing wonders at MilkyWay. I'm now 6.3 million credits there, 9mill total on BOINC, top 1000 in world, top 50 in UK. I dabbled a bit with a project called Aqua@Home, which were giving very good credits per CPU time. But now their credit system is being moved around, so I'm doing a bit more on SETI to get it up to 250K, and Aqua to 1M. Would like GPUGrid on 1M too, with MilkyWay on 10M.


18 May 2009

the i7 build


Got to work on HELLFIRE thursday night.

Setup: EX58-UD3R, i7 920 D0, 3x1GB GSkill DDR3-1333, Akasa Nero

The Akasa Nero comes with a piddly 12cm Akasa fan:



So I strapped my 200CFM Delta fan on it:



Went to 3.7Ghz/185BLCK without any issues - just upping BCLK. RAM was set on auto SPD timings, but ran at 1480Mhz.



For 190BCLK I put the RAM down a ratio, also lowered the voltages on the core.

Had to up some voltages for 195BCLK, but w32 under 7 seconds:



All the time I was thinking temperatures. Using Real Temp 3.0, they were hitting 74-ish.

Going to 200BCLK, and the motherboard kept rebooting, no matter what settings I put it to. Until I put a few setting on Auto on the motherboard, then it booted first time. Went back to the mobo with those settings, put them in, and it failed to boot. WTF?

For 205BCLK, upped Vcore to 1.2875V:



Managed to get the timings for RAM down to 7-6-7-15 at 1230Mhz, but not done any benchmarks with it.

Using the EasyTune, put it up to 210BClk, got a cpuz:
LINK

But running any wPrime caused it to hang. Choosing 210 in the BIOS and it failed to start. I don't really want it getting hotter; I mean 75ºC is a bit toasty for me. Might clock back to 3.7 for day to day work.

Kept track of wPrime scores and settings:



EDIT: Since I wrote this, I went on the BenchTec/SCAN performance day in Bolton - got some good tips and I'll be redoing the overclock.

13 May 2009

i7 enabled, the birth of HELLFIRE


Yes, I've monitoring prices fervently, as well as my bank balance, to see what I could upgrade to.

This week, the CM Storm Scout reduced in price again, to £81.99. This, coupled with a £99.99 1.5TB hard-drive, would have been ideal as an upgrade path.

Though today brought about something different. Something epic.

Since the last update, I read a review over at Tom's Hardware regarding the CoolIt ALC. Overall, they concluded that a big air cooler was far better than the small ALC water cooler, and less of a fiddle to sort out. Then I saw this review, comparing all the major socket-1366 air coolers available at the minute. Two coolers stood out - a Thermaltake eXtreme for the enthusiast, and the Akasa Nero for the mainstream. At £60+ for the former, and £30 for the latter, the review showed that there was barely 5ºC between the two at full load (I should mention that the Noctua enthusiast cooler came 2nd in its category). At the end of the day, if a £30 Akasa performs similar to a £75 CoolIt, I'll take the Akasa and pocket the difference.

Also since the last update, my beloved XFX board I was after went up in price to £200. That was a bit of a bummer. So the task was to find a cheaper motherboard with a 3xPCI-E interface. Luckily, Overclockers had the Asus P6T motherboard, also 3xPCI-E, on sale at £165. I was thinking that is a result! Normally the cheapest board is the Gigabyte EX58-UD3R - a 2xPCI-E board with a unique 3+1 RAM setup (standard for LGA-1366 is 3+3) - at £170. Then, whilst searching on Overclockers, I came across their B-Grade section. B-Grade usually means 'ships with limited warranty, or scruffy box, or no cables, or no manuals, or all of the above'. But lo-and-behold, was the Gigabyte EX58-UD3R for £115. This was a bargain not to be missed.

jabski at BenchTec UK gave a review of the EX58-UD3R using a Noctua CPU cooler with a Core i7 920 D0; showing how he achieved 221BCLKx21 = 4.6Ghz. In reality, a 4Ghz stable system for day-to-day showed more likely - that's still a 50% overclock.

Also at Overclockers, they've added some G.Skill RAM in their lineup. Some 3x1GB DDR3-1333 joy came at the low price of £29. The 3x2GB set was £43, but I conjectured that I may want some DDR3-1866Mhz at a later date (£95), so save some money for then. Plus I use XP, so 2.5GB would be wasted.

If you hadn't guessed by now, this means I went ahead and bought a Core i7 setup :)

CPU: Core i7 920 (2.66Ghz), D0 Stepping (£241.99)
Mobo: Gigabyte EX58-UD3R (£114.99)
RAM: 3x1GB G.Skill DDR3-1333 (£28.99)
CPU Cooler: Akasa Nero (£30.99)

Plus shipping, this came to £423; about £122 less than my previous estimates of minimum requirements. Bargain. As long as the motherboard works first time :) Actually, I ordered this stuff, and it was dispatched 30 minutes later. How cool is that?

The question also arises on what to call my new beast. At first I thought of 'Scyther' - an edgy name which conjures up pictures of ninja, or Pokémon, depending on how your brain works. My brother thought of Sarge, given that at some point I'll want the CM Storm Scout case which is black and a bit militaristic. However in retrospect, Scyther does make me think of the green pokemon; and Sarge just as a word has never felt right with me. I thought of 'The Colonel', or 'Apache', however images of fried chicken and red indians followed suit. Given that the Scout uses red fans, and I want a militaristic and edgy name, I settled on HELLFIRE. The name itself is quite epic when you write it in all caps, and is the name of at least one type of missile. Like HAL, I'll abbrev. to HF for short (which yes, does look like 'Have Fun' - which I will do building it).

Several downsides to ordering this stuff in this order - I'm now one case short to put HAL, as HF will go in the Verre V770 til I get the CM Scout. I'm also a PSU short, so HAL wont be running. For BOINC, I'll probably put the 2x4850 in Dutchie in HF, and the GTX280 into Dutchie.

Though it does make it easier when I look at the next upgrades I want (in no particular order):

3x2GB OCZ DDR3-1866Mhz RAM (£95)
CM Storm Scout (£82)
CM Elite 335 (£30)
1.5TB HDD for HK (£100)
22"-24" montor (£120-200)
64GB SSD (£150)
2x4830 for BOINC/HAL (£150)

So, welcome to HELLFIRE :)

29 Apr 2009

dutchie is all go go go


As I write, Dutchie is up and running, and installing Windows XP. Installation was fairly straight forward - CPU fit nicely, cleaned the CPU and cooler with some Akasa citrus CPU cleaner, added some Arctic Silver 5 thermal paste. The AS5 didn't want to spread evenly, so I did the best I could. What amazed me is that the Zalman CPU Cooler didn't fully go over the CPU - I was expecting it to.

It's currently got a stick of HALs PC8500 in there, and running off my WD Raptor. Why? Well before I set it up for BOINC, we have benchmarks to do! To start, all the 2D benchmarks. Then I'll have a look at some 3D ones with the 4850s in crossfire, if it'll play ball. Watch this space :)

22 Apr 2009

the splurge



All bets are off. Or more precisely, my 6-8 month plan I wrote a couple of posts ago is out the window. Why? Well I've had a very lucky week.

  • It started with acquiring a GTX 280. For free. Thanks to the nVidia CUDA initiative, my facebook status, a friend with a supervisor at Ox Uni with CUDA funding and a few emails, I've been given one to learn CUDA for my own research. It's a beast in size, and I'll be BOINCing on it in the downtime as I learn. I'll post pictures of the installation and size soon.
  • Twice this week already I've wandered up to cross at traffic lights, that usually take ages to let me cross, they've just turned as I walk up.
  • I remembered I had ~£100 in my Paypal account from selling some Xbox360 stuff a couple of months back. Also my finances for the quarter are looking exceptional.
  • Overclockers are having a sale.
  • Some other good things I'm not going to go into here ;)

A culmination of this led me to rethink my PC strategy. For one, I don't necessarily need my brothers computer, JC, running with a 4850 in it. Thus I can return it to an original state without a PSU and use the PSU in it for a new crunching machine.

As for the Overclockers sale, my crunching motherboard I want has dropped £5 in price. Some half-decent 4GB DDR2-1066Mhz RAM is £12 reduced. They're doing a half decent case for £30 (the Antec 300 planned is £50). A Zalman cooler is £17.50. That and the processor I want to use (the X2-5050e) is at eBuyer, which accepts PayPal.

So today I ordered from Overclockers:

Asrock ALiveXFire-eSATA2 (Socket AM2)
OCZ Gold Edition 4GB (2x2GB) DDR2 PC2-8500C5
Coolermaster Elite 335 Case - Black (No PSU)
Zalman CNPS7000C-ALCU CPU Cooler
Akasa AK-TC TIM Clean CPU & Heatsink Cleaner

And from eBuyer:

AMD Athlon X2 5050e Socket AM2 45W Energy Efficient
149212
Arctic Silver 5 High-Density Silver Thermal Compound
126410


I needed some more AS5/cleaner. My old stuff from my last build is a few years old now, so has probably separated. Better safe than sorry.

This also allows me to turn HarukaKanata into its purpose - as network storage, albeit not in the intended case.

The new machine will be thus:

CPU: AMD X2-5050e (2.6Ghz), rated at 45W
GFX: 2x HD 4850
Mobo: Asrock ALiveXFire-eSATA2 (AM2)
PSU: The 700W one I currently have in HK
RAM: 2GB DDR2-800Mhz
Case: Coolermaster Elite 335
HDD: I have some spare 80GB around
CPU Cooler: Zalman CNPS7000C-ALCU

(The RAM is the stuff I have in HALBERD - HAL will get the 4GB from this order.)

This PC will be called 'Dutchie'. The reasoning behind this name is that the processor is a 5050e, which in this modern dating age, 'Going Dutch' means splitting your bill with your date 50/50. (I always pay the bill, because I'm like that)

13 Apr 2009

the pcs

Currently, within my dominion, I have the following 'rigs' running:

HALBERD
CPU: Intel E6400 (2.13Ghz) @ 2.4Ghz
GFX: Asus HD 4850 (650/1000) @ 730/1110
RAM: OCZ Platinum, 2GB
Mobo: MSI Platinum PowerUp! Edition (Crossfire capable)
PSU: Hi-Power 800W
Case: ThermalTake Armour
Main HDD: Western Digital Raptor (10k RPM) 150GB
Storage HDD: Samsung 1.5TB, another 1TB dotted over 4 HDDs
CPU Cooler: Zalman 9500

HARUKAKANATA
CPU: AMD s939 X2-4400 (2.2Ghz) @ 2.53Ghz
GFX: Asus HD 4850 (650/1000) @ 680/1050
RAM: Generic 2GB with heat spreaders
Mobo: Asus A8N-E
PSU: Arctic Power 700W
Case: I forget
Main HDD: Generic 200GB
CPU Cooler: Zalman 9500

JC (my brothers machine, was broke)
CPU: AMD Athlon 3000+ (1.8Ghz) @ 2.16Ghz
GFX: Asus ATi Radeon X550 256MB
Mobo: Asus A8N-E
PSU: My old Hiper 550W
Case: X-Something
Main HDD: Generic 200GB
CPU Cooler: AMD Standard

Pictures will be up later.

I also have the following:

Undecipherable Dell: Dell 1
CPU: P4 2.8Ghz w/HT
- That's about all I've got so far. It wasn't working when my father dropped it off with me, now it does. Need to fiddle with it.

The old storage unit: P4 3Ghz crock
CPU: P4 3Ghz (maybe HT?)
GFX: Radeon 9800 Pro (because I read the sticker)
- I had this one running for a few months, just as somewhere to hold half my hard drives and still have access. I took it offline two weeks ago when I got HarukaKanata up and running. I still want to fiddle and benchmark this. The gfx card is iffy - when I first got it, I accidentally broke a capacitor trying to put a molex cable in it. The Grand-father fixed it so it works, but it really hates temperature.

Laptop 1
CPU: AMD Athlon XP-M 2400+ (1.8Ghz), runs at 100ºC
GFX: Radeon IGP 320M

Laptop 2
CPU: Pentium M 715 @ 1.5Ghz
GFX: Radeon 9000 Mobile

The Work Computer (i.e. the one I use at work and can't fiddle with)
CPU: Q6600 (2.4Ghz) @ 3 Ghz
GFX: 7300SE